Lebara No Service Problem on Xiaomi
No Service on your Xiaomi with Lebara means the device cannot register on the network. This guide covers every cause from SIM seating to account suspension, and provides the correct steps to restore Lebara signal on your Xiaomi.
- Quick checks
- Step-by-step fix
- Common causes
- Frequently asked questions
Restoring Lebara Service on Xiaomi
Turn Airplane Mode on, wait 15 seconds, then turn it off. This forces your Xiaomi to drop and re-register on the Lebara network from scratch.
Power off your Xiaomi. Remove the SIM tray, take the SIM out, check the gold contacts for dirt or damage, then reinsert firmly. Power on and wait 2 minutes.
A full restart clears radio firmware errors that can cause No Service. Hold power and tap Restart. Allow 2 minutes for Lebara network registration to complete.
Visit Lebara's coverage checker or network status page to confirm there is no outage at your location. During outages, No Service affects whole areas simultaneously.
Go to Settings → Mobile Network → Network Operators → Search manually. Select Lebara from the list. This forces re-registration when auto-search fails.
An unpaid bill, spending cap, or suspended account shows as No Service on your Xiaomi. Call 5588 (free from Lebara) from another phone or check the Lebara app to confirm account status.
As a final step before requesting a SIM replacement, go to Settings → Connection & sharing → Reset Wi-Fi, mobile networks & Bluetooth. After reset, wait 5 minutes for Lebara to re-register your device on the network.
Common Causes of This Issue on Lebara
| Cause | Likelihood | Fix |
|---|---|---|
| SIM not seated | High | Remove and reinsert SIM |
| Account suspended | High | Check account status |
| Network outage | Medium | Check carrier status |
Frequently Asked Questions
Why does my Xiaomi say No Service on Lebara?
No Service means your Xiaomi cannot register on any Lebara network cell. Common causes are an improperly seated SIM, a failed SIM card, an account suspension, or being outside Lebara coverage. Toggle Airplane Mode and reseat the SIM as first steps.
How do I check Lebara network coverage?
Visit Lebara's website and use the coverage checker — enter your postcode to see whether Lebara 4G or 5G coverage exists at your location. If Lebara shows no coverage in your area, No Service is expected.
Can a software update cause No Service on Lebara?
Yes — some firmware updates reset network preferences, remove APN profiles, or change preferred network mode settings. After any update, go to your network settings and verify Lebara is selected as the preferred network with the correct APN.
Still having trouble? Contact Lebara support on 5588 (free from Lebara) or visit our contact page for further help.